CLICK HERE FOR OUR NEW & IMPROVED WEB SITE

 

Would you want to touch the gray-and-black sludge in your holding tanks? Neither do your sensors, which is why Sensa-Tank monitors fresh, gray, and black tank levels from outside the tanks’ walls. With no moving parts or contact with liquid, the sensors resist corrosion better than sensor switches stowed inside the tanks. The monitor’s bright-yellow LED lights indicate whether a tank is empty or full, with one-quarter increments for levels in between.

 

 

SensaTank Marine 100 - Three tank

System uses our patented digital Mirus detector cells to accurately measure and display fluid levels inside grey, fresh and black water holding tanks.  Sensors measure the fluid levels through any non-metallic tank wall by using a unique low impedance differential electrical field. Sensors avoid the common problem of misreading debris buildup on the inside tank wall that affects all capacitive sensor based systems.

  • No calibration required

  • "Plug and Go" wiring

  • "Peel and Stick" sensors

  • Includes four sensors per tank for three holding tanks

  • Panel: 3.5"H x 5.5"W


Instructions

 

SensaTank II - Single Tank

 
  • One Tank Sensor
  • Reads Through The Tank
  • Never Touches The Fluid
  • Indicates Full, 2/3, 1/2, Empty
  • Panel: 2.25"H x 2.75H"


Instructions

 

SensaTank II - Two tank

 
  • Two Tank Sensor
  • Reads Through The Tank
  • Never Touches The Fluid
  • Indicates Full, 2/3, 1/2, Empty
  • Panel: 2.25"H x 2.75H"


Instructions

 

SensaLevel Ultra - Single Tank

 

  • One Tank Sensor

  • Reads Through The Tank

  • Never Touches The Fluid

  • Indicates Full Or Empty


Instructions